Sunday, December 21, 2008
Slipcovers are now less expensive than upholstery. I learned a new way of doing covers last year and now, instead of several days to cover a piece, I can do it in less than half the time and I don’t need to have the piece in my workroom. So I can charge a lot less and you save money. A wing backed chair uses about 8 meters of fabric, the cost of fabric for the chair on the cover page of my website was less than $60.00 - we waited for the fabric to go on super-sale.
Slipcovering, if done correctly, will appear as if it is upholstered. (Take a look at the slipcovered pieces at Designsewlutions.ca) Fabric choice is not as limited as upholstery because almost any natural fiber or blend fabric of medium weight can work - from drapery fabric to denim. Consider the possibility of using a Sunbrella fabric - one that won’t fade in the sun for use on chairs for the patio or sunroom.
They can be removed for cleaning. Dry-cleaning is recommended unless you have an industrial sized laundry setup. You don’t want to put 10 to 16 meters of fabric into a regular washer/dryer. Ironing the pieces would be nearly impossible.
You can have additional cushion covers made so spills won’t matter quite so much. You can mix and match fabrics and use home decor trim. We often see Christmas cushions appearing at this time of year - why not have a slipcover made that uses Christmas fabric as well? Or use a great print for a summer cover, a chenille for winter.
Slipcovering does not interfere with the original covering - for sentimental or antique reasons you may not want to damage the original upholstery.
A slipcover is a garment for your furniture. It can’t solve all the problems underneath but it can certainly camouflage some of them.
So - to slipcover or re-upholster? If you like what you have read so far, consider slipcovering. If your piece squeaks, wobbles or sags it is probably a candidate for re-upholstery.
A word of caution: I recently purchased a pre-made chair slipcover. It was made by the most well known brand of ready made slipcovers and I wanted to use it in my slipcover displays - showing the differences between a ready made and a custom made cover. It cost just over $100.00 and it looked so bad I returned it. I knew that even if I put a big sign on it saying ‘ready made’ someone seeing it in a slipcover display would assume that I had done it. Trust me, one size does NOT fit all. It doesn’t in pantyhose and it doesn’t in ready-made slipcovers.
Now - for all of you who have been told that sleeper or pull out sofas can’t be slipcovered - the good news: new techniques and products have made it possible to do these pieces as well.
Saturday, December 6, 2008
If your double paned window is 50” x 50” , and you heat with gas, an estimated $37.00 per year of your heating bill is going out the window. This ONE window only. How many windows do you have in your home? With the right window coverings you could save almost half of this money.
What happens to this $37.00 with different types of covering?
Type Estimate of Dollars saved/year % saved
A venetian ( mini) blind $1.12 3%
An unlined curtain $.74 2%
A top of the line cell shade $15.32 42%
An interlined blackout drape $16.00 44%
An interlined, snug fit Roman blind $18.00 48%
Same window, electric heat, will cost you about $27.00 per year.
Type Estimate of Dollars saved/year % saved
With a venetian $.63 2%
With an unlined curtain $.42 1.5%
A top of the line cell shade $8.66 32%
Interlined/blackout drape $9.00 33%
An interlined, snug fit Roman blind $10.00 37%
I’ve been in this business for about 20 years and I know that good insulation is provided by cellular shades and insulated drapes and blinds but we haven’t been able to actually estimate a dollar figure on per window saving until recently. The upsurge of interest in R-Value has made a lot of new information available. I wanted to share this with all of you who are concerned about your heating bills; as you can see there is a way to decrease the amount of money going out the windows without actually replacing those windows.
If you would like an estimate on how much your windows are costing you and what solutions are available to you within your budget, e-mail me at firstname.lastname@example.org or check my website Designsewlutions.ca and click the link to Articles. I can give you estimates on heat loss cost for single, double and triple glass, electric or gas heat.
I would like to thank my sister, Judy Erlam, for successfully navigating the murky waters of cubic feet per gigajoule, degree days and fuel cost multipliers in order design the system that makes it possible for me t0 provide you with the estimates.